Gomaco RC Conveyor

Placing Concrete Across Flat Slabs Or On Slopes

GOMACO’s RC Conveyor is designed to place concrete across flat slabs or on slopes up to 135 ft. (41.15 m) wide. It is also available for use as a half-width placer with a slipform paver.

It is designed with a lattice-type, structural angle-iron frame with pin-connected sections which are interchangeable in 12 ft. (3.66 m), 6 ft. (1.83 m) and 3 ft. (.91 m) increments for fast setup and easy assembly.

The RC Conveyor comes with a standard, double-flanged, steel trolley wheels that run on any type of rail system or paving forms. Traction speed is variable up to 38 fpm (11.58 mpm), forward and reverse.

The bogies are designed to allow the frame to be set at any skewed angle up to 55 degrees. The travel speed of each bogie is independently controlled to allow negotiation through radii.

The RC Conveyor includes self-widening capability for use on tapered decks and slabs.

Concrete is discharged directly into receiving hopper from Ready Mix trucks.

The diverter car discharges to the front or rear and is operated by hydraulically powered, positive chain drive. The variable hydraulic control of the diverter car and the machine travel assures even and accurate placement of concrete.

The conveyor is counterbalanced with console and receiving hopper at opposite ends, removing the operator from congested areas of the receiving hopper.

The self-contained console has easy-to-operate controls. The RC Conveyor is powered by a 70 hp (52.2 kW) diesel engine.