Gomaco Shoulder Trimmer

Designed Especially For Shoulder Work On GOMACO's 9500

The world’s most versatile material-handling machine, the 9500, has multiple uses with high-production grade trimming, as well as handling the toughest trimming operations, reclaiming operations and concrete placing.

The side-mounted trimmer-head enhances these capabilities and takes shoulder trimming to a new level.

Capable of trimming off either side of the machine.

Hydraulically controlled, side-mounted, sectional trimmer head designed for shoulder work.

Up to 6 ft. (1.83 m) side-shifting capabilities.

48 in. (1219 m) diameter trimming wheel.

Cutting width from 24 in. (610 mm) to 60 in. (1524 mm).

Dual trimmer head drive system is available for the 9500 with a trimming width of 24 in. (610 mm) or more.

Sectional trimmer head allows width changes in 12 in. (305 mm), 18 in. (457 mm) and 24 in. (610 mm) increments.

Existing machine hydraulics run the drive system.

Pressure-compensated side-plates.

The 9500 travels on the existing roadway and the side-mounted trimmer eliminates the problems of restricted side clearance, obstacles along the shoulder and lack of offset or available track path outside the shoulder.

Cross-conveyor for delivery of trimmed material from trimmer head to center-mounted transfer conveyor.

Transfer conveyor has a 30 in. (762 mm) insert and can hydraulically shift forward 8 in. (203 mm) for operation and pull back to allow the trimmer head to side shift for transport.

Rear conveyor on the 9500 is used to place the trimmed material into haul units or into windrows.

Transport width under 12 ft. (3.66 m) with shoulder trimmer mounted on the 9500