Gomaco Equipment

Gomaco High Production Screed

Introducing the revolutionary high-production, truss-mounted screed, for paving of bridge decks, flat slabs, and concrete floors. The new GOMACO screed can advance as much as four feet (1.22 m) in a single pass to drastically reduce your finishing time, providing savings in your concrete delivery cost and total project labor. The leading auger is 5.7 […]

Gomaco Hawkeye Screed

The GOMACO Hawkeye Screed is designed for finishing a variety of projects, including driveways, streets, ramps or any flat slab. The truss system on the MV-18 model is manufactured out of high tensile tubular steel in an 18 in. (457 mm) equilateral triangle. This screed is built to last in concrete job-site conditions. Hawkeye screed […]

Gomaco CF-790 Canal Finishers

GOMACO’s CF-790 canal finisher is specifically designed for finishing wider width canals and is easy to operate and saves time and labor costs on all your canal finishing projects. Because no two canals are alike, the CF-790 can be custom ordered to fit your exact specifications. The CF-790 canal finisher has welded steel tubular lattice-type […]

Gomaco C-750 & SL-750 Cylinder Finishers

GOMACO Corporation pioneered the development of the first cylinder finisher over 50 years ago. The late Harold W. Godberson, founder of GOMACO Corporation, developed and manufactured a bridge deck finisher to meet the growing needs for bridge markets. Considered to be a milestone, the cylinder finisher made GOMACO a recognized name in the construction industry. […]

Gomaco C-650 & SL-650 Cylinder Finishers

GOMACO’s cylinder finishers are designed with versatility. They are easy to operate and save time and labor costs on all your concrete finishing needs. If the project calls for street or airport paving, parking lots, building slabs, tennis courts or almost any type of flat slab, the GOMACO C-650 is ideal. Flat Slab Finishing Consolidates […]

Gomaco C-450 & SL-450 Cylinder Finishers

GOMACO Corporation pioneered the development of the first cylinder finisher over 50 years ago. The late Harold W. Godberson, founder of GOMACO Corporation, developed and manufactured a bridge deck finisher to meet the growing needs for bridge markets. Considered to be a milestone, the cylinder finisher made GOMACO a recognized name in the construction industry. […]

T/C-400 Texture/Cure Machine

Both the T/C-400 and T/C-600 frames permit width adjustment from 12 ft. 10 in. (3.91 m) up to 56 ft. 10 in. (17.32 m). The T/C-400 is equipped with two end cars, each having two hydraulically powered, foam-filled rubber flotation tires, and the T/C-600 is equipped with two hydraulically powered, gear-driven crawler tracks. The T/C-600 […]

Gomaco T/C-600 Texture/Cure Machine

The T/C-600 accomplishes tasks quickly because of its optional high travel speed. The 176 fpm (53.6 mpm) is the fastest in the industry. Both the T/C-600 and T/C-400 frames permit width adjustment from 12 ft. 10 in. (3.91 m) up to 56 ft. 10 in. (17.32 m). The T/C-600 is equipped with two hydraulically powered, […]

Gomaco T/C-5600 Texture/Cure Machine

Walking End Car The T/C-5600 texture/cure machine features a new walking end car with cure tank. Frame sections can be added or removed by turning the tracks 90 degrees, and walking the end car with attached cure tank to the required width. The walkway and railway telescope with the walking end car. The transverse tining […]

Gomaco Shoulder Trimmer

The world’s most versatile material-handling machine, the 9500, has multiple uses with high-production grade trimming, as well as handling the toughest trimming operations, reclaiming operations and concrete placing. The side-mounted trimmer-head enhances these capabilities and takes shoulder trimming to a new level. Capable of trimming off either side of the machine. Hydraulically controlled, side-mounted, sectional […]

Gomaco GT-3400 Sidewalk Trimmer

A trimmer for narrower-width, zero-clearance flat or monolithic sidewalk and curb and gutter Easily fits between existing trees, utility poles and other obstacles in residential sidewalk paving Three-track design features All-Track Steering for easy maneuverability between obstacles, getting on/off stringline, and loading/unloading the machine Trims standard and monolithic sidewalk profiles up to eight feet (2.4 […]

Gomaco Commander III Trimmer

High-production trimmer capable of widths up to 11 feet (3.4 m) Features the same framework as the Commander III curb and gutter model, but with minor modifications – Right, front track has been switched to a pivoting front track to accommodate zero trimmerhead clearance on both sides – Front tracks are parallel and trimmerhead is undermounted – […]

Gomaco 9500 Trimmer/Placer

The Advantage of GOMACO’s Unique Front-Mounted, Two-Track Design More Power and Minimum Side Clearance… Our state-of-the-art, hydrostatic, direct drive motor in the trimmerhead provides ample power for trimming capability and is mounted internally to allow minimal side-clearance. Does not Leave the End of the Pass Untrimmed… Only the front-mounted trimmer allows for trimming to the end of […]

Gomaco Rock Hopper For Placer/Spreaders

The new rock hopper can be used in tandem with the RTP-500 rubber-tracked placer. End-dump trucks can quickly discharge the aggregate into the RTP-500, which in turn loads the new hopper on the placer/spreader. In Response To Customer Demand A GOMACO customer needed a way to place rock base for 123,191 square yards (103,000 m2) on […]

Gomaco RC Conveyor

GOMACO’s RC Conveyor is designed to place concrete across flat slabs or on slopes up to 135 ft. (41.15 m) wide. It is also available for use as a half-width placer with a slipform paver. It is designed with a lattice-type, structural angle-iron frame with pin-connected sections which are interchangeable in 12 ft. (3.66 m), […]

Gomaco RTP-500 Rubber-Tracked Placer

High-production results are achieved with the versatility of the long placing conveyor. The conveyor is 35 feet (10.67 m) long and 36 inches (914 mm) wide, with 170 degree hydraulic swing, and 12 feet (3.66 m) of hydraulic elevation adjustment. The placing conveyor allows for fast and accurate material placement from the haul road, over […]

Gomaco PS-4000 Placer/Spreader

The PS-4000 is built for maximum placing and spreading productivity in central mix operations. The PS-4000 is designed to place and spread concrete up to 43 ft. (13.11 m) wide with the single conveyor or up to 50 ft. (15.24 m) with the twin conveyor system or spread concrete without the use of the conveyor […]

Gomaco PS-2600 Placer/Spreader

The GOMACO PS-2600 is built for maximum placing and spreading productivity in central-mix operations. The GOMACO exclusive G+® control system features self-diagnostics for front and rear grade, cross slope, steering, reverse steering, and spreading accuracy and ease of operation. The sensors on the placer/spreader operate off the same stringline as the paver. Equipped with G+ ConnectTM for […]

Gomaco IDBI Dowel Bar Inserter

GOMACO’s IDBI Dowel Bar Inserter is the industry’s most productive and compact system for the automatic insertion of dowel bars across a finished concrete slab. It is designed for installation onto a two- or four-track paver. The paving operation, bar insertion and finishing operations are all combined into one compact unit. Click here to see a step-by-step […]

Gomaco Four-Track Commander III

The GOMACO Commander III is all about vision, safety, performance, and the operator. The Hydraulic Package on the Commander III provides independent hydraulic travel circuits to each track allowing G+® to control each individual track speed through a radius. The engine with its rear facing cooling package is designed for better operator visibility, quieter operation, and to provide clean air […]

Gomaco GP-4000 Slipform Paver

The GP-4000 four-track and two-track features high-production and proven rideability results on new and reconstruction of highways, airports and city streets. The modular frame telescopes on the left side up to 3 ft. 6 in. (1.07 m) and modular vibrator packages provide ease in changing hydraulics for paving widths. Mainline and airport paving widths range […]

Gomaco GP-2600 Slipform Paver

Superior Quality And Technology That No One Else Can Offer The job-proven GOMACO GP-2600 is preferred by contractors throughout the world. All of the features that have made the GP-2600 the number one mid-range paver in universal paving markets are still standard. The GP-2600 has even more outstanding features that provide today’s contractor with the […]

Gomaco 4400 Barrier Paver

GOMACO U-shaped operator’s platform, with vibration isolation, puts the operator comfortably on top of the action. Control console slides from side-to-side for ultimate operator control. When not in operation, the console locks safely away in center position. New proprietary G+® control system operates in multiple languages. Power-optimized Cummins QSB3.3, 99 hp (74 kW) diesel engine. Hydraulic […]

Gomaco GP-2400 Slipform Paver

Two-track or four-track slipform paver. Simple to operate with the new GOMACO designed G+® control system. Range of paving widths up to 16.5 feet (5 m) with the standard telescoping frame. Widths up to 24 feet (7.5 m) with frame inserts. T-beam mounting rail for accurate and quick mold positioning, quick mounting, and removal of the […]

Gomaco GP360 Placer/Spreader Slipform Paver

The GP360 is a high-production placer/spreader up to 36 feet (10.97 m) wide with a 60 inch (1524 mm) belt and a top-of-the-line two-track GP3 for slipform paving up to 30 feet (9.14 m) wide. GOMACO’s GP360 is equipped with the exclusive G+® control system to unlock the incredible versatility of both a slipform paver and […]

Gomaco GP3 Slipform Paver

The GOMACO GP3 is designed for paving up to 30 feet (9.14 m) wide and to accommodate multiple width changes. The GP3 is available as a two-track or four-track slipform paver.

Gomaco GP4 Slipform Paver

The GOMACO GP4 is designed for paving up to 40 feet (12.19 m) wide and to accommodate multiple width changes.

Gomaco Equipment