Lippmann’s wheel-mounted portable jaw plants provide a durable, high-production jaw crusher on a stout, easy-to-move truck frame. These plants also feature the rugged Lippmann feeder, capable of handling side or rear loading from various types of equipment. Lippmann also offers multiple discharge conveyor configurations, including a front discharge configuration, an extended front discharge configuration, and a side discharge configuration. Combining standard configurations for various applications with a willingness to develop custom solutions for every plant gives each customer the kind of flexibility that translates into success in the field

  • 2450E Portable Electric Jaw Plant
  • 3048E Portable Jaw Plant
  • 3062E Portable Jaw Plant
  • 3650E Portable Jaw Plant
  • 4248E Portable Jaw Plant

Lippman Model Specifications

Click on the links below to expand each model

2450E

2450E PORTABLE JAW PLANT
STANDARD FEATURES
  • Delivers a metered flow of filtered oil to each bearing.
  • Low oil pressure alarm system.
  • 20 gallon reservoir.
  • 1/2 gpm oil pump with a 1 hp, 230/460 volt electric motor (starter and wiring not included), flow regulating valve, pressure gauge, piping, flow sights for return lines, immersion heater, and controls.
  • Slide on and slide off feeder hopper module is a flared-type hopper with 3/4” HARDOX steel plate sides.
  • Quad rear axles with twelve (16) Hub Piloted Wheels.
  • 11:00 x 22.5 radial tubeless tires, and air brakes.
  • Also includes all necessary chutes and supports, support legs, guards for v-belt drives, operator’s platform with railing and ladder, tail lights, reflectors, directional signals, and mud flaps.

3048E

3048E PORTABLE JAW PLANT
STANDARD FEATURES
  • 48” x 34’ (approx.) front discharge conveyor with 3 ply belting and 5” CEMA C idlers.
  • Includes a 20-hp 1800-rpm TEFC electric motor (starter, wiring and controls not included).
  • The plant has a by-pass chute under the grizzly section of the feeder.
  • The conveyor portion under the grizzly by-pass chute and the jaw crusher includes impact idlers.
  • Quad axle Hutch suspension with sixteen (16) Hub Piloted Wheels.
  • 11:00 x 22.5 radial tubeless tires, and air brakes.
  • Also includes all necessary chutes and supports, support legs, guards for v-belt drives, operator’s platform with railing and ladder, tail lights, reflectors, directional signals, and mud flaps.

3062E

3062E PORTABLE JAW PLANT
STANDARD FEATURES
60” x 35’ portable under crusher side discharge conveyor with a magnet and pan feeder.  Conveyor includes:

  • Single axle with four 11.00 x 22.5 tubeless tires, brakes, belt, v-belt drive.
  • 25 hp electric motor, starter, controls and wiring.
  • 55 in-line self-cleaning magnet with 8 kw rectifier and support structure
  •       48” x 78” Pan Feeder Under the Jaw
  • 3/8” formed steel pan.
  • (2) Vibrating motors 2.4 HP each.
  • ½” pan liners.
  • ¾” impact absorbent material between pan and liners.
  • Mounted on (6) coil springs.
  • Rubber flashing mounted around the rear and sides of the feeder to eliminate spillage.
    • Helical gears.
    • Model LLH-22 with two full-length, self-counterweighted solid steel shafts.
    • Four (4) 110-mm spherical roller bearings and an oil splash lubrication system.
    • Mechanism is enclosed in a dustproof housing.
    • Sheaves, belts, and pivoted motor base are included along with a 40 hp, NEMA C High-Torque 1800 rpm TEFC electric motor
  • Quad axle Hutch suspension with sixteen (16) Hub Piloted Wheels.
  • 11:00 x 22.5 radial tubeless tires, and air brakes.
  • Also includes all necessary chutes and supports, support legs, guards for v-belt drives, operator’s platform with railing and ladder, tail lights, reflectors, directional signals, and mud flaps.

3650E

3650E PORTABLE PRIMARY ELECTRIC JAW CRUSHING PLANT
STANDARD FEATURES
  • 54” x 34’ (approx.) front discharge conveyor with 3 ply belting and 5” CEMA C idlers.
  • Includes a (1)25 hp 1800 rpm TEFC electric motor.
  • The plant has a by-pass chute under the grizzly section of the feeder.
  • Quad axle Hutch suspension with sixteen (16) Hub Piloted Wheels.
  • 11:00 x 22.5 radial tubeless tires, and air brakes.
  • Includes tag axle provisions
  • Also includes all necessary chutes and supports, support legs, guards for v-belt drives, operator’s platform with railing and ladder, tail lights, reflectors, directional signals, mud flaps.

4248E

4248E PORTABLE PRIMARY ELECTRIC JAW CRUSHING PLANT
STANDARD FEATURES
  • 54” x 34’ (approx.) front discharge conveyor with 3 ply belting and 5” CEMA C idlers.
  • Includes a 40-hp 1800-rpm TEFC electric motor (starter, wiring and controls not included).
  • The plant has a by-pass chute under the grizzly section of the feeder.
  • The conveyor portion under the grizzly by-pass chute and the jaw crusher includes impact idlers.
  • Quad axle with heavy-duty suspension and Hub Piloted Wheels.
  • 11:00 x 22.5 radial tubeless tires, and air brakes.
  • Also includes all necessary chutes and supports, support legs, guards for v-belt drives, operator’s platform with railing and ladder, tail lights, reflectors, directional signals, and mud flaps.